Blog

Towing is important. Whether you are moving your car from one place to another or just taking it on a road trip, there is a need for towing. Whatever the reason might be, you need to know how to tow a car and that’s where “Tow bar installer – 10 simple steps” comes in.

Read this guide of “Tow bar installer – 10 simple steps” and learn to tow in the simplest way.

How to use a tow bar installer

Installing a tow bar is crucial when towing a car. If you don’t install it properly, your car can get damaged severely, even worse it can get into an accident. So, let’s take a look at the 10 steps that are essential in a tow bar installer.

1. Choose a good tow bar

The first and most important step of towing is to choose a good tow bar. There are some points that you should remember when selecting a tow bar for our car. they are:

• The weight you want to pull
• Your cars model and make year
• Be sure to read the user instruction of the tow bar
• Keep an eye on your warranty conditions before installing a tow bar

2. Select a strong mounting area

After selecting a good tow bar, you have to identify a good mounting spot for the tow bar installer. Most of the time your bumper should do the work as it is one of the sturdiest places in the car. Look closely and find a good sturdy spot. Then put up the tow bar to check if it fits properly with the bumper or not.

3. Drill out holes in the right place

Drilling out holes properly is a very crucial process. You have to be extra careful while doing it. Otherwise, it can damage your car’s multiple components. Use an indent where you want to make a hole. By doing this, you are making sure that the drill doesn’t slide from the spot. And try to make the holes the same size as the bolts. Otherwise, they will get loose. Follow the tow bars manual to learn the size of the bolts or use a ruler to get a precise measurement.

4. Make the surface clean

After you have successfully drilled the holes, clean the surfaces of the bumper and the tow bar. Cleaning them properly helps them to stay rust-proof for a longer period. And don’t forget to apply anti-corrosion substance into the drilled holes.

5. Installing the mounting brackets properly

When you are done cleaning both the bumper and the tow bar, install the mounting brackets. Look for the detailed instructions in the manual to know the detailed process of mounting the brackets with the tow bar installer.

6. Tighten the fasteners

Make sure the fasteners are tight enough and they are tightly attached. Tighten the bolts and nuts with a wrench. Then check them again after you are done tightening. After traveling a few miles, recheck them to be sure that they are not loose.

7. Wire the tow bar

Wire the tow bar to synchronize braking between the two car’s electrical systems. Check if both of your car’s brake lights and turn signals are working seamlessly at the same time or not. Don’t miss this step otherwise, there’s a high chance that you will create havoc on the road.

8. Installing the tow bar

After you are done with the previously mentioned steps, you have to install the tow bar. Slide the tow bar inside the previously installed mounting brackets with a linchpin. Then connect the tow bar by dropping a linchpin in each hole. Voila! The tow bar is now connected with your car.

9. Safety chains are a must

Attach safety chains between both of your vehicles to avoid any unexpected accidents. These chains will give you more confidence on the road as they will act as an extra layer of security in case the tow bar gets unhitched. So, don’t forget them.

10. Final inspection

Before you hit the road, do a follow-up inspection after completing all the processes. Check each process again to be reassured. Keep in mind that you can not complete all the process alone. So, ask someone to lend a hand. After the recheck, if everything seems to be in place, you are ready to hit the road.